Baltimore County's Dedicated Generac Specialists

What Size Generac Generator Do I Need?

The short answer: most Baltimore County homes need 18–24kW. But the right size comes from your electrical load, not your square footage. This Generac sizing guide shows how sizing actually works — and how to get yours calculated free.

  • Licensed & InsuredMaryland MHIC
  • Generac SpecialistsAll we do
  • 24/7 RepairEmergency response
  • Free EstimatesOn installations

Prefer to talk? (443) 499-2549

Get your free quote

60-second form — a specialist replies within 1 business hour. No obligation; your info stays private.

Generator sizing is the single most consequential decision in the whole project — more than brand, more than fuel type. Too small and the unit trips offline mid-outage; too big and you've paid thousands for capacity that sits idle. Here's the framework professionals use.

Size by load, not by square footage

Your generator must cover your home's peak electrical demand in amps — the moment when the most things run at once (AC compressor starting while the well pump, fridge, and dryer are going). Square footage ignores all of this: a 2,000 sq ft all-electric home can need a bigger generator than a 3,000 sq ft home with gas heat.

A proper load calculation adds up your major appliances' running and starting watts. It takes a trained eye about 20 minutes on site — which is why it's part of our free assessment.

Typical Generac sizes for Baltimore County homes

SizeTypical fitWhat it runs
10–14kWSmaller homes, condos, essentials-onlyFridge, lights, sump pump, furnace fan, some outlets — not central AC
18kWMid-size homes with gas heatEssentials plus one central AC system with load management
22–24kWMost Baltimore County homes — the sweet spotTrue whole-home coverage including central air
26kWLarge or all-electric homesWhole home plus pool, hot tub, or workshop loads

Liquid-cooled Protector series (30kW+) covers estates and large properties — ask us if that's your situation.

Generator sizing questions, answered

What happens if my Generac is too small?

An undersized generator will overload and shut down when demand spikes — usually right when the AC compressor kicks in during an outage. The transfer switch sheds loads to protect the unit, so you'll be choosing which breakers stay on. Proper sizing avoids this entirely.

What happens if my Generac is too big?

Oversizing mostly wastes money: a bigger unit, bigger transfer switch, more gas consumption, and higher install cost for capacity you'll never use. Very oversized units can also 'wet stack' under chronic light loads, though that's rare in residential sizes.

Can I add to my generator later if my needs grow?

You can't easily upsize the generator itself, but you can add Generac's load-management modules, which let a mid-size unit intelligently cycle big loads like AC compressors. It's smarter to size correctly up front — the free load calculation exists for exactly this.

Do I size by square footage?

No — square footage is a rough proxy at best. Two identical 2,500 sq ft homes can need different generators if one has gas heat and the other is all-electric with a hot tub. Size by electrical load (amps), which we calculate free during the assessment.

Proudly serving Baltimore County

From Towson to Essex, Dundalk to Monkton — wherever you are in the county, a Generac specialist is close by.

24/7 Emergency Repair

Generator down? We respond fast.

A dead generator during a storm is an emergency — and we treat it like one. Call any time, day or night, and a Baltimore County Generac technician will get your backup power back online.

  • Generator won't start
  • Flashing red or yellow error codes
  • Transfer switch won't transfer power
  • Storm or power-surge damage
  • Runs rough, surges, or shuts off

Same-day & after-hours emergency response across Baltimore County.

(443) 499-2549

Mon–Sat: 9:00 AM – 5:00 PM · Sun: Emergency Service Only

Let's keep your home powered.

Free estimates on installations. 24/7 emergency repair. One county, one specialty: Generac.

Talk to a Generac Specialist — (443) 499-2549